Specializing in Low-E Composite Radiant Insulation, Cellulose, and Residential Firewalls.


 
 

Low-E™ Radiant Barrier

Low-E™ Radiant Barrier

Low-E Radiant Barrier is a double sided aluminum barrier designed for installation under rafters or in any application where an airspace on both sides of the product is achieved. The product is very easy to install and can dramatically reduce energy bills in any climate.

In warm climates it will stop radiant heat transfer from entering your attic which will put less strain on your A/C system. In cold climates it will work the same way by keeping valuable heat within the home. It is a fact that heat rises, without a reflective insulation or radiant barrier installed in your roof or attic you will lose a considerable amount of heat through your roof and/or ceiling. In areas where ice damming is a severe problem intalling a radiant barrier will slow down the snow melting on the roof, which causes ice damming. Ice and water shields can be expensive and are only a patch or "Band-Aid" for the problem, they do not contribute to fixing the problem, Low-E does.

 

 

Product Identification

Low-E™ Radiant Barrier

Product Codes:

RB400

Other Information

 

Finished Dimension:

48" Width x 250' Length, (standard) Shipped in roll form

Core Material:

1/8" Polyethylene

Facings:

99.4% Polished Aluminum with reinforced scrim

Perm Rating:

ASTM E-96:0.008

Flame & Smoke D/S:

ASTM E-84-98

 

Flame Spread: 10

Smoke Developed: 34

 

Emittance:

0.03


Warning: Although ESP Low-E™ Insulation Products are all ASTM fire tested and have excellent fire ratings; it is recommended that they or any insulation material should not be exposed to open flame or other ignition sources of sufficient intensity during shipment, storage or installation.

     

 

hosting by TAB Software Systems