Micro-E E-Z Seal Insulation

	Specializing in Low-E Composite Radiant Insulation, Cellulose, and Residential Firewalls.

	Micro-E® Insulation	Micro-E® Insulation Micro-E is manufactured using the same scrim reinforced facings as our Low-E product but is only an 1/8” thick! Micro-E® can be used as a residential roofing underlayment or as a vapor barrier / insulation behind interior drywall. 1/8” thick insulation available in 4’ rolls Double Sided pure aluminum facing with reinforcement Available trimmed or with extended staple flange Great for use over interior studs under drywall
Product Identification	Micro-E® Insulation
Product Codes:	M4000, M400S, M6000, M600S
Other Information
Finished Dimension:	1/8" Thickness±10%, 48" Width x 125' Length, (standard) Shipped in roll form
Core Material:	1/8" Polyethylene
Facings:	99.4% Polished Aluminum with reinforced scrim/White
Perm Rating:	ASTM E-96:0.008
Flame & Smoke D/S:	ASTM E-84-98
	Flame Spread: 0
	Smoke Developed: 20
R-Value:	*D/S: ASTM C-236: Down 10.24
	*D/S: ASTM C-236: Horizontal 7.05
	*D/S: ASTM C-236: Up 7.25
Emittance:	0.03

*Based on known R-value of foam thickness R-.5 less than 1/4" products
*System R-Values as per ASTM C-236, air to air
*Adjusted to meet criteria equivalent to ASTM 1224
Warning: Although ESP Low-E™ Insulation Products are all ASTM fire tested and have excellent fire ratings; it is recommended that they or any insulation material should not be exposed to open flame or other ignition sources of sufficient intensity during shipment, storage or installation.